Like many, I have always loved the show Fixer Upper. Basically anything Joanna Gains does I love, and when I discovered what a shiplap wall was I knew I wanted this in my home.
Luckily my husband is up for any home improvement project idea I throw at him and was ready to tackle this one. It was pretty easy and straight forward and we were finished within a day. Below are photos of the the walls before; plain, boring, ready for some shiplap! (Also, see if you can spot my dog Edgar in the photo above. I caught him sitting in his favorite spot behind the couch next to the window ☺️)
We went to Home Depot looking for the cheapest wood option, found some thin underlayment ($12 a sheet) and asked the employee to rip each sheet into 6 in wide planks. My husband used his nail gun to attach each board to the wall. We started with the longest board on top and then cut the lengths to fill in and create a staggered looking pattern. We taped two pennies together and used these as spacers between each board as they were nailed to the wall.
**One thing to note, the employee at Home Depot did not rip each sheet exactly 6 in. wide, so half way through our project we nailed on a board that was 6.5 in., causing the corner where the two boards meet to be misaligned. I recommend double checking that each sheet is ripped the correct length or ripping the boards yourself so it is exact. (My husband wanted to redo this whole project because of the misalignment but I talked him into leaving it – I still love it!)
After the boards were nailed to the wall, we added trim, used putty to spackle the nail holes and then used a sprayer to paint the boards white. This tied everything together (we also replaced our floors, trim and bathroom door which are shown in the after photos). Below you can see the corner where the boards don’t align – maybe one day we will fix it!